Yanchep – Western Australia – Hardness

2007/08: Yanchep  (Western Australia) – Hardness 214mg/L (Highest Detection Only)

2008/09: Yanchep  (Western Australia) – Hardness 210mg/L (Highest), 205mg/L (mean)

2009/10: Yanchep  (Western Australia) – Hardness 200mg/L (Highest)

2010/11 Yanchep (Western Australia) Hardness 210mg/L (max), 205mg/L (mean)

2011/12 Yanchep (Western Australia) Hardness 210mg/L (max), 208mg/L (mean)

2013/14 Yanchep (Western Australia) Hardness 230mg/L (max), 220mg/L (mean)

2014/15 Yanchep (Western Australia) Hardness 220mg/L (max), 214mg/L (mean)

2015/16 Yanchep (Western Australia) Hardness 230mg/L (max), 225mg/L (mean)

2016/17 Yanchep (Western Australia) Hardness 240mg/L (max), 233mg/L (mean)

2017/18 Yanchep (Western Australia) Hardness 250mg/L (max), 242mg/L (mean)

2018/19: Yanchep (Western Australia) Hardness 240mg/L (max), 224mg/L (mean)

2019/20: Yanchep (Western Australia) Hardness 230mg/L (max), 228mg/L (mean)

GUIDELINE

“To minimise undesirable build‑up of scale in hot water systems, total hardness (as calcium carbonate) in drinking water should not exceed 200 mg/L.

Hard water requires more soap than soft water to obtain a lather. It can also cause scale to form on hot water pipes and fittings. Hardness is caused primarily by the presence of calcium and magnesium ions, although other cations such as strontium, iron, manganese and barium can also contribute.”

Australian Drinking Water Guidelines 2011

2007/20 – Yanchep (Western Australia) – Hardness

Yanchep – Western Australia – Hardness

2007/08: Yanchep  (Western Australia) – Hardness 214mg/L (Highest Detection Only)

2008/09: Yanchep  (Western Australia) – Hardness 210mg/L (Highest), 205mg/L (mean)

2009/10: Yanchep  (Western Australia) – Hardness 200mg/L (Highest)

2010/11 Yanchep (Western Australia) Hardness 210mg/L (max), 205mg/L (mean)

2011/12 Yanchep (Western Australia) Hardness 210mg/L (max), 208mg/L (mean)

2013/14 Yanchep (Western Australia) Hardness 230mg/L (max), 220mg/L (mean)

2014/15 Yanchep (Western Australia) Hardness 220mg/L (max), 214mg/L (mean)

2015/16 Yanchep (Western Australia) Hardness 230mg/L (max), 225mg/L (mean)

2016/17 Yanchep (Western Australia) Hardness 240mg/L (max), 233mg/L (mean)

2017/18 Yanchep (Western Australia) Hardness 250mg/L (max), 242mg/L (mean)

2018/19: Yanchep (Western Australia) Hardness 240mg/L (max), 224mg/L (mean)

2019/20: Yanchep (Western Australia) Hardness 230mg/L (max), 228mg/L (mean)

GUIDELINE

“To minimise undesirable build‑up of scale in hot water systems, total hardness (as calcium
carbonate) in drinking water should not exceed 200 mg/L.

Hard water requires more soap than soft water to obtain a lather. It can also cause scale to form on hot water pipes and fittings. Hardness is caused primarily by the presence of calcium and magnesium ions, although other cations such as strontium, iron, manganese and barium can also contribute.”

Australian Drinking Water Guidelines 2011