Burrup LNG + Supply – Western Australia – Hardness

2008/09: Burrup LNG (Western Australia) – Hardness 370mg/L (max), 192mg/L (mean)

2010/11 Burrup LNG (Western Australia) Hardness 350mg/L (max), 315mg/L (av)

2010/11 Burrup Supply (Western Australia) Hardness 330mg/L (max), 310mg/L (av)

2011/12 Burrup LNG (Western Australia) Hardness 260mg/L (max), 260mg/L (av)

2011/12 Burrup Supply (Western Australia) Hardness 250mg/L (max), 250mg/L (av)

2013/14 Burrup LNG (Western Australia) Hardness 380mg/L (max), 260mg/L (av)

2013/14 Burrup Supply (Western Australia) Hardness 380mg/L (max), 260mg/L (av)

2014/15 Burrup LNG (Western Australia) Hardness 240mg/L (max), 235mg/L (av)

2014/15 Burrup Supply (Western Australia) Hardness 240mg/L (max), 235mg/L (av)

2015/16 Burrup LNG (Western Australia) Hardness 260mg/L (max), 255mg/L (av)

2015/16 Burrup Supply (Western Australia) Hardness 250mg/L (max), 250mg/L (av)

2016/17 Burrup LNG (Western Australia) Hardness 230mg/L (max), 220mg/L (av)

2016/17 Burrup Supply (Western Australia) Hardness 230mg/L (max), 225mg/L (av)

2019/20: Burrup (Western Australia) Hardness 290mg/L (max), 250mg/L (mean)

GUIDELINE

“To minimise undesirable build‑up of scale in hot water systems, total hardness (as calcium
carbonate) in drinking water should not exceed 200 mg/L.

Hard water requires more soap than soft water to obtain a lather. It can also cause scale to form on hot water pipes and fittings. Hardness is caused primarily by the presence of calcium and magnesium ions, although other cations such as strontium, iron, manganese and barium can also contribute.”

Australian Drinking Water Guidelines 2011

Burrup LNG + Supply – Western Australia – Total Dissolved Solids

2009/10: Burrup LNG (Western Australia) – Total Dissolved Solids 644 mg/L (Max)

2009/10: Burrup Supply (Western Australia) – Total Dissolved Solids 650 mg/L (Max)

2010/11 Burrup LNG (Western Australia) Total Dissolved Solids 758mg/L (max), 718mg/L (av)

2010/11 Burrup Supply (Western Australia) Total Dissolved Solids 752mg/L (max), 718mg/L (av)

2011/12 Burrup LNG (Western Australia) Total Dissolved Solids 618mg/L (max), 618mg/L (av)

2011/12 Burrup Supply (Western Australia) Total Dissolved Solids 604mg/L (max), 604mg/L (av)

2013/14 Burrup LNG (Western Australia) Total Dissolved Solids 848mg/L (max), 595mg/L (av)

2013/14 Burrup Supply (Western Australia) Total Dissolved Solids 861mg/L (max), 599mg/L (av)

2019/20: Burrup (Western Australia) Total Dissolved Solids 659mg/L (max), 582mg/L (mean)

GUIDELINE

“No specific health guideline value is provided for total dissolved solids (TDS), as there are no
health effects directly attributable to TDS. However for good palatability total dissolved solids
in drinking water should not exceed 600 mg/L.

Total dissolved solids (TDS) consist of inorganic salts and small amounts of organic matter that are dissolved in water. Clay particles, colloidal iron and manganese oxides and silica, fine enough to pass through a 0.45 micron filter membrane can also contribute to total dissolved solids.

Total dissolved solids comprise: sodium, potassium, calcium, magnesium, chloride, sulfate, bicarbonate, carbonate, silica, organic matter, fluoride, iron, manganese, nitrate, nitrite and phosphates…” Australian Drinking Water Guidelines 2011