2009/16 – Tully (Queensland) – E.coli, Turbidity

Center map
Traffic
Bicycling
Transit
2009/11: Tully (Queensland) – E.coli
(exact date ?): Tully (Queensland) – E.coli: 1MPN/100ml

“Coliforms are Gram-negative, non-spore-forming, rod-shaped bacteria that are capable of aerobic and facultative anaerobic growth in the presence of bile salts or other surface active agents with similar growth-inhibiting properties. They are found in large numbers in the faeces of humans and other warm-blooded animals, but many species also occur in the environment.

Thermotolerant coliforms are a sub-group of coliforms that are able to grow at 44.5 ± 0.2°C. E. coli is the most common thermotolerant coliform present in faeces and is regarded as the most specific indicator of recent faecal contamination because generally it is not capable of growth in the environment. In contrast, some other thermotolerant coliforms (including strains of Klebsiella, Citrobacter and Enterobacter) are able to grow in the environment and their presence is not necessarily related to faecal contamination. While tests for thermotolerant coliforms can be simpler than for E. coli, E. coli is considered a superior indicator for detecting faecal contamination…” ADWG

2009/16 – Tully (Queensland) – Turbidity

2009/16: Tully (Queensland) – Turbidity 120NTU (max), 3.74NTU av.

19/7/16: Tully (Queensland) – Turbidity 108NTU (max) – 242.5mm of rainfall within 7 days

10/1/17: Tully (Queensland) – Turbidity 39.95NTU (max) – 621mm of rainfall within 4 days

Chlorine-resistant pathogen reduction: Where filtration alone is used as the water treatment
process to address identified risks from Cryptosporidium and Giardia, it is essential
that filtration is optimised and consequently the target for the turbidity of water leaving
individual filters should be less than 0.2 NTU, and should not exceed 0.5 NTU at any time
Disinfection: A turbidity of less than 1 NTU is desirable at the time of disinfection with
chlorine unless a higher value can be validated in a specific context.

Aesthetic: Based on aesthetic considerations, the turbidity should not exceed 5 NTU at the
consumer’s tap