Australian Drinking Water Map

Maldon (Victoria) – E.coli

2010/11 Maldon E.coli  1/100mL (96.2% samples no e.coli ) (2 positive)

“E.coli

Thermotolerant coliforms are a sub-group of coliforms that are able to grow at 44.5 ± 0.2°C. E. coli is the most common thermotolerant coliform present in faeces and is regarded as the most specific indicator of recent faecal contamination because generally it is not capable of growth in the environment. In contrast, some other thermotolerant coliforms (including strains of Klebsiella, Citrobacter and Enterobacter) are able to grow in the environment and their presence is not necessarily related to faecal contamination. While tests for thermotolerant coliforms can be simpler than for E. coli, E. coli is considered a superior indicator for detecting faecal contamination…” ADWG

Maldon (Victoria) Nickel

20/5/16 Maldon Nickel 0.16mg/L

Nickel: ADWG Health Guideline 0.02mg/L. A chemical element and silvery white corrosion resistant metal with a golden tinge. 60% of nickel production is used in nickel steel (particularly stainless steel). In water, mainly a problem with nickel plated fittings. Main releases to the environment are from the burning of fossil fuels and in waste discharges from electroplating industries.

2007/8 – Maldon Victoria) – Turbidity

2007/8 Maldon Turbidity 11NTU

Chlorine-resistant pathogen reduction: Where filtration alone is used as the water treatment
process to address identified risks from Cryptosporidium and Giardia, it is essential
that filtration is optimised and consequently the target for the turbidity of water leaving
individual filters should be less than 0.2 NTU, and should not exceed 0.5 NTU at any time
Disinfection: A turbidity of less than 1 NTU is desirable at the time of disinfection with
chlorine unless a higher value can be validated in a specific context.

Aesthetic: Based on aesthetic considerations, the turbidity should not exceed 5 NTU at the
consumer’s tap

Maldon  (Victoria) – Lead

2015/16: Maldon Lead 0.004mg/L (max)

Lead Guideline reduced from 0.01mg/L to 0.005mg/L in June 2025. “The concentration of lead in water within premises may be higher, especially in older buildings, due to contact of the water with lead-containing plumbing products (enHealth 2021). A review found several Australian and international studies that detected up to 0.162 mg/L of lead in drinking water due to leaching from lead-containing plumbing materials including taps and lead service lines, suggesting that leaching of lead from lead-containing plumbing materials can be substantial (SLR 2023)… Based on health considerations, the concentration of lead in drinking water should not exceed 0.005 mg/L.”

2008/11 + 2015/16 – Maldon (Victoria) – E.coli, Nickel, Turbidity, Lead

in , , ,
Maldon (Victoria) – E.coli
2010/11 Maldon E.coli  1/100mL (96.2% samples no e.coli ) (2 positive)
“E.coli
Thermotolerant coliforms are a sub-group of coliforms that are able to grow at 44.5 ± 0.2°C. E. coli is the most common thermotolerant coliform present in faeces and is regarded as the most specific indicator of recent faecal contamination because generally it is not capable of growth in the environment. In contrast, some other thermotolerant coliforms (including strains of Klebsiella, Citrobacter and Enterobacter) are able to grow in the environment and their presence is not necessarily related to faecal contamination. While tests for thermotolerant coliforms can be simpler than for E. coli, E. coli is considered a superior indicator for detecting faecal contamination…” ADWG Maldon (Victoria) Nickel 20/5/16 Maldon Nickel 0.16mg/L Nickel: ADWG Health Guideline 0.02mg/L. A chemical element and silvery white corrosion resistant metal with a golden tinge. 60% of nickel production is used in nickel steel (particularly stainless steel). In water, mainly a problem with nickel plated fittings. Main releases to the environment are from the burning of fossil fuels and in waste discharges from electroplating industries. 2007/8 – Maldon Victoria) – Turbidity 2007/8 Maldon Turbidity 11NTU Chlorine-resistant pathogen reduction: Where filtration alone is used as the water treatment process to address identified risks from Cryptosporidium and Giardia, it is essential that filtration is optimised and consequently the target for the turbidity of water leaving individual filters should be less than 0.2 NTU, and should not exceed 0.5 NTU at any time Disinfection: A turbidity of less than 1 NTU is desirable at the time of disinfection with chlorine unless a higher value can be validated in a specific context. Aesthetic: Based on aesthetic considerations, the turbidity should not exceed 5 NTU at the consumer’s tap Maldon  (Victoria) – Lead 2015/16: Maldon Lead 0.004mg/L (max) Lead Guideline reduced from 0.01mg/L to 0.005mg/L in June 2025. “The concentration of lead in water within premises may be higher, especially in older buildings, due to contact of the water with lead-containing plumbing products (enHealth 2021). A review found several Australian and international studies that detected up to 0.162 mg/L of lead in drinking water due to leaching from lead-containing plumbing materials including taps and lead service lines, suggesting that leaching of lead from lead-containing plumbing materials can be substantial (SLR 2023)… Based on health considerations, the concentration of lead in drinking water should not exceed 0.005 mg/L.”