Australian Drinking Water Map

Robinvale (Victoria)

Highest Level Only

Robinvale 0.250mg/L THM’s 2010/11

Trihalomethanes Australian Guideline Level 250μg/L (0.25mg/L)

Why and how are THMs formed?
“When chlorine is added to water with organic material, such as algae, river weeds, and decaying leaves, THMs are formed. Residual chlorine molecules react with this harmless organic material to form a group of chlorinated chemical compounds, THMs. They are tasteless and odourless, but harmful and potentially toxic. The quantity of by-products formed is determined by several factors, such as the amount and type of organic material present in water, temperature, pH, chlorine dosage, contact time available for chlorine, and bromide concentration in the water. The organic matter in water mainly consists of a) humic substance, which is the organic portion of soil that remains after prolonged microbial decomposition formed by the decay of leaves, wood, and other vegetable matter; and b) fulvic acid, which is a water soluble substance of low molecular weight that is derived from humus”. Source: https://water.epa.gov/drink/contaminants/index.cfm

Robinvale (Victoria) – Turbidity

2024/25: Robinvale – Turbidity 15NTU (max), 0.1NTU (95th percentile)

Chlorine-resistant pathogen reduction: Where filtration alone is used as the water treatment process to address identified risks from Cryptosporidium and Giardia, it is essential that filtration is optimised and consequently the target for the turbidity of water leaving individual filters should be less than 0.2 NTU, and should not exceed 0.5 NTU at any time.

Disinfection: A turbidity of less than 1 NTU is desirable at the time of disinfection with chlorine unless a higher value can be validated in a specific context.

Aesthetic: Based on aesthetic considerations, the turbidity should not exceed 5 NTU at the consumer’s tap

2010/11 + 2024/25: Robinvale (Victoria) – Trihalomethanes, Turbidity

in
Robinvale (Victoria) Highest Level Only Robinvale 0.250mg/L THM’s 2010/11 Trihalomethanes Australian Guideline Level 250μg/L (0.25mg/L) Why and how are THMs formed? “When chlorine is added to water with organic material, such as algae, river weeds, and decaying leaves, THMs are formed. Residual chlorine molecules react with this harmless organic material to form a group of chlorinated chemical compounds, THMs. They are tasteless and odourless, but harmful and potentially toxic. The quantity of by-products formed is determined by several factors, such as the amount and type of organic material present in water, temperature, pH, chlorine dosage, contact time available for chlorine, and bromide concentration in the water. The organic matter in water mainly consists of a) humic substance, which is the organic portion of soil that remains after prolonged microbial decomposition formed by the decay of leaves, wood, and other vegetable matter; and b) fulvic acid, which is a water soluble substance of low molecular weight that is derived from humus”. Source: https://water.epa.gov/drink/contaminants/index.cfm Robinvale (Victoria) – Turbidity 2024/25: Robinvale – Turbidity 15NTU (max), 0.1NTU (95th percentile) Chlorine-resistant pathogen reduction: Where filtration alone is used as the water treatment process to address identified risks from Cryptosporidium and Giardia, it is essential that filtration is optimised and consequently the target for the turbidity of water leaving individual filters should be less than 0.2 NTU, and should not exceed 0.5 NTU at any time. Disinfection: A turbidity of less than 1 NTU is desirable at the time of disinfection with chlorine unless a higher value can be validated in a specific context. Aesthetic: Based on aesthetic considerations, the turbidity should not exceed 5 NTU at the consumer’s tap