Ivanhoe (NSW) – Selenium
2011/21: Ivanhoe NSW Selenium 0.01mg/L, 0.002mg/L (av.)
Based on health considerations, the concentration of selenium in drinking water should not exceed 0.004 mg/L (2011-2025 guideline 0.01mg/L). “General description Selenium (Se) and selenium salts are widespread in the environment. Selenium is released from natural and human-made sources (such as the burning of coal). Selenium is also a by-product of the processing of sulfide ores, chiefly in the copper refining industry. The major use of selenium is in the manufacture of electronic components. It is used in several other industries, and selenium compounds are used in some insecticides, in hair shampoos as an antidandruff agent, and as a nutritional feed additive for poultry and livestock. Selenium copper alloys have also been identified as a potential replacement for lead copper alloys in plumbing products. Further information on lead replacements in plumbing products (such as selenium copper alloys) is available in Information Sheet 4.1 – Metal and metalloid chemicals leaching from plumbing products. Selenium concentrations in drinking water source waters are generally very low and depend on local geochemistry, climatic conditions (e.g. drought), pH and the presence of iron salts. Selenium in water is mainly present as inorganic compounds, predominantly selenate. Weathering of rocks and soil may result in low levels of selenium in water, which may be taken up by plants (SLR 2022). Food is the major source of intake for Australians. Cereal and grain products contribute most to intake, while fish and liver contain the highest selenium concentrations.” ADWG 2025
2011/21 – Ivanhoe (NSW) – Chlorine
2011/21: Ivanhoe (NSW). Free Chlorine 6.1mg/L (max), 0.97mg/L (mean). 2 results >5mg/L in 2012
2011/21: Ivanhoe (NSW). Total Chlorine 6.5mg/L (max), 1.6mg/L (mean). 4 results >5mg/L in 2011 and 2012
GENERAL DESCRIPTION
Chlorine dissociates in water to form free chlorine, which consists of aqueous molecular chlorine, hypochlorous acid and hypochlorite ion. Chlorine and hypochlorites are toxic to microorganisms and are used extensively as disinfectants for drinking water supplies. Chlorine is also used to disinfect sewage and wastewater, swimming pool water, in-plant supplies, and industrial cooling water.
Chlorine has an odour threshold in drinking water of about 0.6 mg/L, but some people are particularly sensitive and can detect amounts as low as 0.2 mg/L. Water authorities may need to exceed the odour threshold value of 0.6 mg/L in order to maintain an effective disinfectant residual.
In the food industry, chlorine and hypochlorites are used for general sanitation and for odour control. Large amounts of chlorine are used in the production of industrial and domestic disinfectants and bleaches, and it is used in the synthesis of a large range of chemical compounds.
Free chlorine reacts with ammonia and certain nitrogen compounds to form combined chlorine. With ammonia, chlorine forms chloramines (monochloramine, dichloramine and nitrogen trichloride or trichloramine) (APHA 2012). Chloramines are used for disinfection but are weaker oxidising agents than free chlorine.
Free chlorine and combined chlorine may be present simultaneously (APHA 2012). The term totalchlorine refers to the sum of free chlorine and combined chlorine present in a sample.
Chlorine (Free) ADWG Guideline: 5mg/L (Chlorine in chloraminated supplies 4.1mg/L). Chlorine dissociates in water to form free chlorine, which consists of aqueous molecular chlorine, hypochlorous acid and hypochlorite ion.
Chlorine (Total) ADWG Guideline 5mg/L (chloraminated supplies 4.1mg/L): The term total chlorine refers to the sum of free chlorine and combined chlorine present in a sample
Ivanhoe (NSW) – Arsenic
2011/21: Ivanhoe (NSW) Arsenic 0.009mg/L
Arsenic: Australian Drinking Water Guideline = 0.01mg/L
Arsenic is bioaccumulative and symptoms may take 10-15 years to develop after expsoure at high levels. Drinking water can be contaminated with inorganic arsenic through wind blown dust, leaching or runoff from soil, rocks and sediment. Groundwater sources such as bores will usually have higher arsenic levels than surface water. In major Australian reticulated water supplies concentrations of arsenic range up to 0.015mg/L, with typical values less than 0.005mg/L.
Ivanhoe (NSW) – Sodium
2011/21: Ivanhoe (NSW) Sodium 277mg/L (max), 141 mg/L (av.)
“Based on aesthetic considerations (taste), the concentration of sodium in drinking water
should not exceed 180 mg/L….The sodium ion is widespread in water due to the high solubility of sodium salts and the abundance of mineral deposits. Near coastal areas, windborne sea spray can make an important contribution either by fallout onto land surfaces where it can drain to drinking water sources, or from washout by rain. Apart from saline intrusion and natural contamination, water treatment chemicals, domestic water softeners and
sewage effluent can contribute to the sodium content of drinking water.” ADWG 2011
Ivanhoe – NSW – Total Dissolved Solids
2011/21: Ivanhoe (NSW) Total Dissolved Solids 949mg/L (max), 561mg/L (av.)
GUIDELINE
“No specific health guideline value is provided for total dissolved solids (TDS), as there are no health effects directly attributable to TDS. However for good palatability total dissolved solids in drinking water should not exceed 600 mg/L.
Total dissolved solids (TDS) consist of inorganic salts and small amounts of organic matter that are dissolved in water. Clay particles, colloidal iron and manganese oxides and silica, fine enough to pass through a 0.45 micron filter membrane can also contribute to total dissolved solids.
Ivanhoe (New South Wales) – Chloride
2011/21: Ivanhoe (NSW) Chloride 290mg/L (max), 196mg/L (av.)
“Chloride is present in natural waters from the dissolution of salt deposits, and contamination from effluent disposal. Sodium chloride is widely used in the production of industrial chemicals such as caustic soda, chlorine, and sodium chlorite and hypochlorite. Potassium chloride is used in the production of fertilisers.
The taste threshold of chloride in water is dependent on the associated cation but is in the range 200–300 mg/L. The chloride content of water can affect corrosion of pipes and fittings. It can also affect the solubility of metal ions.
In surface water, the concentration of chloride is usually less than 100 mg/L and frequently below 10 mg/L. Groundwater can have higher concentrations, particularly if there is salt water intrusion.
Based on aesthetic considerations, the chloride concentration in drinking water should not exceed 250 mg/L.
Ivanhoe (NSW) Hardness
2011/2021: Ivanhoe (NSW) Hardness 287mg/L (max), 228mg/L (av). 14 of 16 results result >200mg/L
GUIDELINE
“To minimise undesirable build‑up of scale in hot water systems, total hardness (as calcium carbonate) in drinking water should not exceed 200 mg/L.
Hard water requires more soap than soft water to obtain a lather. It can also cause scale to form on hot water pipes and fittings. Hardness is caused primarily by the presence of calcium and magnesium ions, although other cations such as strontium, iron, manganese and barium can also contribute.”
Australian Drinking Water Guidelines 2011
2011/21 – Ivanhoe – Turbidity
2011/21: Ivanhoe – Turbidity 700NTU (max), 8.2NTU (av.).
Chlorine-resistant pathogen reduction: Where filtration alone is used as the water treatment process to address identified risks from Cryptosporidium and Giardia, it is essential that filtration is optimised and consequently the target for the turbidity of water leaving individual filters should be less than 0.2 NTU, and should not exceed 0.5 NTU at any time.
Disinfection: A turbidity of less than 1 NTU is desirable at the time of disinfection with chlorine unless a higher value can be validated in a specific context.
Aesthetic: Based on aesthetic considerations, the turbidity should not exceed 5 NTU at the consumer’s tap