Coffin Bay – (South Australia) – Selenium
18/10/21: Coffin Bay Selenium 0.0031mg/L
Based on health considerations, the concentration of selenium in drinking water should not exceed 0.004 mg/L (2011-2025 guideline 0.01mg/L). “General description Selenium (Se) and selenium salts are widespread in the environment. Selenium is released from natural and human-made sources (such as the burning of coal). Selenium is also a by-product of the processing of sulfide ores, chiefly in the copper refining industry. The major use of selenium is in the manufacture of electronic components. It is used in several other industries, and selenium compounds are used in some insecticides, in hair shampoos as an antidandruff agent, and as a nutritional feed additive for poultry and livestock. Selenium copper alloys have also been identified as a potential replacement for lead copper alloys in plumbing products. Further information on lead replacements in plumbing products (such as selenium copper alloys) is available in Information Sheet 4.1 – Metal and metalloid chemicals leaching from plumbing products. Selenium concentrations in drinking water source waters are generally very low and depend on local geochemistry, climatic conditions (e.g. drought), pH and the presence of iron salts. Selenium in water is mainly present as inorganic compounds, predominantly selenate. Weathering of rocks and soil may result in low levels of selenium in water, which may be taken up by plants (SLR 2022). Food is the major source of intake for Australians. Cereal and grain products contribute most to intake, while fish and liver contain the highest selenium concentrations.” ADWG 2025
Coffin Bay – (South Australia) – Hardness
2018/19 Coffin Bay (South Australia) Hardness as CaCO3 243mg/L (max), 232.25mg/L (mean)
GUIDELINE
“To minimise undesirable build‑up of scale in hot water systems, total hardness (as calcium
carbonate) in drinking water should not exceed 200 mg/L.
Hard water requires more soap than soft water to obtain a lather. It can also cause scale to form on hot water pipes and fittings. Hardness is caused primarily by the presence of calcium and magnesium ions, although other cations such as strontium, iron, manganese and barium can also contribute.”
Australian Drinking Water Guidelines 2011
Coffin Bay – South Australia – Total Dissolved Solids
2022/23: Coffin Bay (South Australia) Total Dissolved Solids 622mg/L (max), 494.25mg/L (av. 2022/23)
GUIDELINE
“No specific health guideline value is provided for total dissolved solids (TDS), as there are no
health effects directly attributable to TDS. However for good palatability total dissolved solids
in drinking water should not exceed 600 mg/L.
Total dissolved solids (TDS) consist of inorganic salts and small amounts of organic matter that are dissolved in water. Clay particles, colloidal iron and manganese oxides and silica, fine enough to pass through a 0.45 micron filter membrane can also contribute to total dissolved solids.
Total dissolved solids comprise: sodium, potassium, calcium, magnesium, chloride, sulfate, bicarbonate, carbonate, silica, organic matter, fluoride, iron, manganese, nitrate, nitrite and phosphates…” Australian Drinking Water Guidelines 2011