Maiden Gully/Marong  (Victoria) – Lead

2009/10: Maiden Gully/Marong Lead 0.004mg/L

2018/19: Maiden Gully/Morang Lead 0.008mg/L (max), 0.0011mg/L (av.)

Lead Guideline reduced from 0.01mg/L to 0.005mg/L in June 2025. “The concentration of lead in water within premises may be higher, especially in older buildings, due to contact of the water with lead-containing plumbing products (enHealth 2021). A review found several Australian and international studies that detected up to 0.162 mg/L of lead in drinking water due to leaching from lead-containing plumbing materials including taps and lead service lines, suggesting that leaching of lead from lead-containing plumbing materials can be substantial (SLR 2023)… Based on health considerations, the concentration of lead in drinking water should not exceed 0.005 mg/L.”

Maiden Gully/Marong  (Victoria) – Ammonia
 

2019/20: Maiden Gully/Marong Ammonia 0.499mg/L. 2019/20 average: 0.268mg/L

Based on aesthetic considerations (corrosion of copper pipes and fittings), the concentration
of ammonia (measured as ammonia) in drinking water should not exceed 0.5 mg/L.
No health-based guideline value is set for ammonia.

“…Most uncontaminated source waters have ammonia concentrations below 0.2 mg/L. High concentrations (greater than 10 mg/L) have been reported where water is contaminated with animal waste. Ammonia is unlikely to be detected in chlorinated supplies as it reacts quickly with free chlorine. Ammonia in water can result in the corrosion of copper pipes and fittings, causing copper stains on sanitary ware. It is also a food source for some microorganisms, and can support nuisance growths of bacteria and algae, often with a resultant increase in the nitrite concentration.” ADWG 2011

2009/10 + 2019/20: Maiden Gully/Marong (Victoria) – Lead, Ammonia

Maiden Gully/Marong  (Victoria) – Lead 2009/10: Maiden Gully/Marong Lead 0.004mg/L 2018/19: Maiden Gully/Morang Lead 0.008mg/L (max), 0.0011mg/L (av.) Lead Guideline reduced from 0.01mg/L to 0.005mg/L in June 2025. “The concentration of lead in water within premises may be higher, especially in older buildings, due to contact of the water with lead-containing plumbing products (enHealth 2021). A review found several Australian and international studies that detected up to 0.162 mg/L of lead in drinking water due to leaching from lead-containing plumbing materials including taps and lead service lines, suggesting that leaching of lead from lead-containing plumbing materials can be substantial (SLR 2023)… Based on health considerations, the concentration of lead in drinking water should not exceed 0.005 mg/L.” Maiden Gully/Marong  (Victoria) – Ammonia
2019/20: Maiden Gully/Marong Ammonia 0.499mg/L. 2019/20 average: 0.268mg/L Based on aesthetic considerations (corrosion of copper pipes and fittings), the concentration of ammonia (measured as ammonia) in drinking water should not exceed 0.5 mg/L. No health-based guideline value is set for ammonia. “…Most uncontaminated source waters have ammonia concentrations below 0.2 mg/L. High concentrations (greater than 10 mg/L) have been reported where water is contaminated with animal waste. Ammonia is unlikely to be detected in chlorinated supplies as it reacts quickly with free chlorine. Ammonia in water can result in the corrosion of copper pipes and fittings, causing copper stains on sanitary ware. It is also a food source for some microorganisms, and can support nuisance growths of bacteria and algae, often with a resultant increase in the nitrite concentration.” ADWG 2011