2019/22 – Kanpi (South Australia) – Fluoride, Chloride, Hardness, Total Dissolved Solids, Sodium

Non-Potable Water Supply

2019 – Kanpi (South Australia ) – Fluoride

19/03/2019: Kanpi Fluoride 1.6 mg/L

27/8/19: Kanpi Fluoride 1.6mg/L (max), 1.567mg/L (av)

17/11/20: Kanpi Fluoride 2.4mg/L

23/2/21: Kanpi Fluoride 2.1mg/L

25/5/21: Kanpi Fluoride 2.2mg/L

10/8/21: Kanpi NDW Customer Tap Non Potable Fluoride 2.5mg/L (max), (2.4mg/L av. 2021/22)

“Fluoride occurs naturally in seawater (1.4 mg/L), soil (up to 300 parts per million) and air (from volcanic gases and industrial pollution). Naturally occurring fluoride concentrations in drinking water depend on the type of soil and rock through which the water drains. Generally, concentrations in surface water are relatively low (<0.1–0.5 mg/L), while water from deeper wells may have quite high concentrations (1–10 mg/L) if the rock formations are fluoride-rich.” 2011 ADWG. Health Guideline: 1.5mg/L

Kanpi (South Australia) – Chloride

25/2/20: Kanpi Chloride 402mg/L

Chlorite: ADWG Health 0.3mg/L.

Chlorite and chlorate are disinfection by-products of chlorine dioxide disinfection process.

“… industry are having serious problems meeting chlorite/chlorate limits that were proposed in the new Australian Drinking Water Guidelines, especially for disinfection in long distance pipelines that are dosed with sodium hyptochlorite” pers comm 18/5/11.

“Chlorite occurs in drinking water when chlorine dioxide is used for purification purposes. The
International Agency for Research on Cancer (IARC) has concluded that chlorite is not classifiable as carcinogenic to humans and is listed in the Group 3 category. Changes in red blood vessels due to oxidative stress are a major concern with excessive levels of Chlorite in drinking water. According to the US EPA, potential health problems for people drinking Chorite above safe drinking water guideline include: Anemia in infants and young children and nervous system effects.” https://water.epa.gov/drink/contaminants/index.cfm

“Chlorine dioxide (chlorite) is rarely used as a disinfectant in Australian reticulated supplies.
When used, the chlorite residual is generally maintained between 0.2mg/L and 0.4mg/L. It is
particularly effective in the control of manganese-reducing bacteria. Few data are available on
chlorate levels in Australian water supplies….Chlorine dioxide, chlorite, and chlorate are all
absorbed rapidly by the gastrointestinal tract into blood plasma and distributed to the major
organs. All compounds appear to be rapidly metabolised. Chlorine dioxide has been shown to
impair neurobehavioural and neurological development in rats exposed before birth. Experimental studies with rats and monkeys exposed to chlorine dioxide in drinking water have shown some evidence of thyroid toxicity; however, because of the studies’ limitations, it is difficult to draw firm conclusions (WHO 2005) The primary concern with chlorite and chlorate is oxidative stress resulting in changes in red blood cells. This end point is seen in laboratory animals and, by analogy with chlorate, in humans exposed to high doses in poisoning incidents (WHO 2005).” Australian Drinking Water Guidelines – National Health and Medical Research Centre

“…Subchronic studies in animals (cats, mice, rats and monkeys) indicate that chlorite and chlorate cause haematological changes (osmotic fragility, oxidative stress, increase in mean corpuscular volume), stomach lesions and increased spleen and adrenal weights… Neurobehavioural effects (lowered auditory startle amplitude, decreased brain weight and decreased exploratory activity) are the most sensitive endpoints following oral exposure to chlorite…” https://www.hc-sc.gc.ca/ewh-semt/pubs/water-eau/chlorite-chlorate/indexeng.
php#sec10_1Guidelines for Canadian Drinking Water Quality.

Kanpi (South Australia) – Hardness

25/2/20: Kanpi (South Australia) Hardness 516mg/L

22/3/22: Kanpi TS NDW Non Potable Total Hardness 373mg/L (max)

GUIDELINE

“To minimise undesirable build‑up of scale in hot water systems, total hardness (as calcium
carbonate) in drinking water should not exceed 200 mg/L.

Hard water requires more soap than soft water to obtain a lather. It can also cause scale to form on hot water pipes and fittings. Hardness is caused primarily by the presence of calcium and magnesium ions, although other cations such as strontium, iron, manganese and barium can also contribute.”

Australian Drinking Water Guidelines 2011

Kanpi (South Australia) – Total Dissolved Solids.

25/2/20: Kanpi (South Australia) Total Dissolved Solids 1260mg/L

22/3/22: Kanpi TS NDW Non Potable Total Dissolved Solids  1000mg/L (max)

GUIDELINE

“No specific health guideline value is provided for total dissolved solids (TDS), as there are no
health effects directly attributable to TDS. However for good palatability total dissolved solids
in drinking water should not exceed 600 mg/L.

Total dissolved solids (TDS) consist of inorganic salts and small amounts of organic matter that are dissolved in water. Clay particles, colloidal iron and manganese oxides and silica, fine enough to pass through a 0.45 micron filter membrane can also contribute to total dissolved solids.

Total dissolved solids comprise: sodium, potassium, calcium, magnesium, chloride, sulfate, bicarbonate, carbonate, silica, organic matter, fluoride, iron, manganese, nitrate, nitrite and phosphates…” Australian Drinking Water Guidelines 2011

Kanpi (South Australia) Sodium

25/2/20: Kanpi (South Australia) Sodium 257mg/L

22/3/22: Kanpi NDW Customer Tap Non Potable Sodium  219mg/L (max)

“Based on aesthetic considerations (taste), the concentration of sodium in drinking water
should not exceed 180 mg/L….The sodium ion is widespread in water due to the high solubility of sodium salts and the abundance of mineral deposits. Near coastal areas, windborne sea spray can make an important contribution either by fallout onto land surfaces where it can drain to drinking water sources, or from washout by rain. Apart from saline intrusion and natural contamination, water treatment chemicals, domestic water softeners and
sewage effluent can contribute to the sodium content of drinking water.” ADWG 2011