Bellevue Heights (South Australia) – Bromodichloromethane
2022/23: Bellevue Heights (South Australia) Bromodichloromethane 82ug/L (max), 58.58ug/L (av.)
WHO Guideline level BDCM: 60ug/L (Australian Guideline for BDCM is included in the Trihalomethane (THM) combined total of BDCM, Chloroform, Dibromochloromethane and Bromoform. THM guideline is 250ug/L)
“Carcinogenicity : Bromodichloromethane is reasonably anticipated to be a human carcinogen based on sufficient evidence of carcinogenicity from studies in experimental animals.
Cancer Studies in Experimental Animals: Oral exposure to bromodichloromethane caused tumors at several different tissue sites in mice and rats. Administration of bromodichloromethane by stomach tube caused benign and malignant kidney tumors (tubular-cell adenoma and adenocarcinoma) in male mice and in rats of both sexes, benign and
malignant liver tumors (hepatocellular adenoma and carcinoma) in female mice, and benign and malignant colon tumors (adenomatous polyps and adenocarcinoma) in rats of both sexes (NTP 1987, ATSDR 1989, IARC 1991, 1999).
Bellevue Heights – South Australia – Temperature
November 30 2016: Bellevue Heights (South Australia) Highland Dr – Temperature 22C
January 4 2017: Bellevue Heights (South Australia) Highland Dr – Temperature 23C
February 1 2017: Bellevue Heights (South Australia) Highland Dr – Temperature 26C
March 1 2017: Bellevue Heights (South Australia) Highland Dr – Temperature 25C
March 29 2017: Bellevue Heights (South Australia) Highland Dr – Temperature 24C
GUIDELINE
“No guideline is set due to the impracticality of controlling water temperature.
Drinking water temperatures above 20°C may result in an increase in the number of
complaints.
Temperature is primarily an aesthetic criterion for drinking water. Generally, cool water is more palatable than warm or cold water. In general, consumers will react to a change in water temperature. Complaints are most frequent when the temperature suddenly increases.
The turbidity and colour of filtered water may be indirectly affected by temperature, as low water temperatures tend to decrease the efficiency of water treatment processes by, for instance, affecting floc formation rates and sedimentation efficiency.
Chemical reaction rates increase with temperature, and this can lead to greater corrosion of pipes and fittings in closed systems. Scale formation in hard waters will also be greater at higher temperatures…
Water temperatures in major Australian reticulated supplies range from 10°C to 30°C. In some long, above-ground pipelines, water temperatures up to 45°C may be experienced…
The effectiveness of chlorine as a disinfectant is influenced by the temperature of the water being dosed. Generally higher temperatures result in more effective disinfection at a particular chlorine dose, but this may be counterbalanced by a more rapid loss of chlorine to the atmosphere (AWWA 1990).